Forespar SR-2 Jib Roller

Forespar SR-2 Jib Roller

Image
  • Order within
Available: In Stock
$65.13
Successful pre-order.Thanks for contacting us!
Wishlist Compare

SR-2 Jib Roller

The Forespar® SR-2 Jib Roller with fit shrouds from 3/16" thru 3/8" wire diameter. 

Use the proper size pair of insert liners according to the table below:

  • 3/8" wire - use no insert
  • 5/16" wire - use #1 inserts
  • 9/32" wire - use #2 inserts
  • ¼" wire - use #3 inserts
  • 7/32" wire - use #4 inserts
  • 3/16" wire - use #5 inserts

The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain's chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).

Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape. 

Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don't have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.

SR-2 Jib Roller

The Forespar® SR-2 Jib Roller with fit shrouds from 3/16" thru 3/8" wire diameter. 

Use the proper size pair of insert liners according to the table below:

  • 3/8" wire - use no insert
  • 5/16" wire - use #1 inserts
  • 9/32" wire - use #2 inserts
  • ¼" wire - use #3 inserts
  • 7/32" wire - use #4 inserts
  • 3/16" wire - use #5 inserts

The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain's chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).

Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape. 

Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don't have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.

Domestic Shipping with FedEx or UPS typically takes 4 to 7 days.
Please allow additional time in inclement weather or natural disasters in a region.
In most cases, your order will be shipped out on the same day that it was placed if that order has been placed on a Monday - Friday before 3 PM eastern time. Otherwise, your order will ship on the next (non-holiday) business day. Most orders placed on this website are shipped directly out of the manufacturers' distribution centers. Once placed, an order cannot be changed or canceled. Please choose carefully! Ground shipping should reach any valid US address within 5 business days excluding holidays and weekends. Tracking numbers will be posted within 24 hours of the shipment.
We generally ship by either FedEx or UPS whichever carrier provides the shortest delivery time or best service to your location. The rate charged for the shipping of your order will be at our cost and is based on the weight of your products and your ZIP code location.